What are some common Metal Roof Problems and how to solve them?
There is a lot that goes into building a house – establishing the floors, the walls and most importantly, the roofing. It is essential to choose the appropriate roofing material for your home by considering many factors. These include the climate in the area of your residence, common roofing patterns in the neighbourhood, temperature, rainfall statistics, etc.
Things to look out for in roofing materials vary from their sustainability, average life, efficiency in terms of energy and protection, durability and so on. The most common roofs that fulfil all these criteria are metal roofs; Known far and wide for their longevity and suitable resistance – these are most certainly the best choice when it comes to roofing material.
This is the exact reason why metal roofs are the most popular and widely used. If you are someone living around Houston, you are most likely to encounter many houses with metal roofs. But in case you are confused about whether you will need to get the roof repaired or restored than contact
Houston commercial roofing experts– this is just the article for you!
Metal roofs do come with many advantages, but there are some common problems that are needed to be addressed.
Scroll down to find details about the
metal roof problems and ideal ways to get them repaired!
What are the common metal roofing problems?
Given here are some challenges you might face in the journey after your metal roof installation is completed. While these roofs are known to be efficient and long-lasting, common problems may arise at any point.
Some of these
metal roof problems are:
Leaking
If you are living in an area that experiences heavy rain or snowfall, roof leaking might be a major problem. This, in turn, can damage the roof in many ways. The leakage might also reach the walls and destroy the paint, texture, etc. If the metal roof has fasteners that are exposed to the open air, it might experience leaking.
Problems mostly arise in cases where the roof is not installed appropriately. This might be due to improper fitting of the screws or wrong seam formation. And since leaking also comes with a lot of expenses, It not only requires roof restoration but also repairing walls and other affected parts of the house.
Scratches
The most common problem with metal roofs is their susceptibility to getting scratched. This may happen because of different situations and actions. Especially during preparation, the manufacturers must take extra care to avoid scratching. Companies handling transportation must also be careful with the process.
Similarly, during installation, it must be ensured that installers do not drop the metal sheets or panels or rub tools against them. After installation, walking on the roof must be avoided to prevent its scratching. While shifting or shipping, edge guards must be used between the metal sheets. Listing devices must also be used to reduce the chances of scratching and scuffs.
Oil canning
This is seen in metal roofs made from Aluminium, Copper, Steel or Zinc, etc. Oil canning is in the form of wrinkles or waves on the metal panel mostly as a result of stress. The stress mainly occurs due to coiling, rolling or frequent slitting.
It may also happen if there is insufficient space for thermal expansion and compression with seasonal variation. This is also called elastic buckling in some cases and leads to loss of the flat appearance of the metal roof.
Corrosion in different forms
Metal roofs are known to be corrosion resistant but in many cases, different forms of corrosion do occur. If the coating is not properly done under the panel, water can be trapped. This can corrode the metal sheet and ultimately cause damage. People who are situated in and around coastal areas need to be careful about the choice of metals.
This is because the roofs will be more prone to corrosion by saltwater. Ideal metal roofs for these houses may be of Aluminium or Zinc. The metal roofs may also be susceptible to galvanic corrosion. This happens when two different metals are placed in contact with each other and they react with water or electrolytes. In this case, the more active or reactive metal will be corroded causing a portion of the roof to be damaged.
Colour fading and chalking
Irrespective of the location of your house, the roof will always be exposed to the atmosphere and UV rays of the sun. These UV rays often lead to chalking and colour fading. Chalking is prevalent when the UV rays decompose the paint resin and form a white deposition over the roof.
Fading takes place when the paint pigment is broken down by atmospheric agents like water or UV rays. This might also occur due to prolonged exposure to environmental pollution. The extent of fading and chalking depends on the region or locality and its climatic conditions. The cleanliness and pollution levels are also contributing factors.
Errors in installation
Apart from problems caused by external agents, many metal roof problems arise from poor installation. Loose screws, loose-fitting or finishing, wrong attachments can all lead to many problems that come in the way of roof durability.
This is the reason why you must find the top roofing contractors in Houston TX to handle all your repair, mending and roof installation process. The professional services can help you prevent any damage that your roof might face in future.
How to solve metal roofing problems?
While contacting roofing contractors in Houston tx is the best solution, here are some solutions that we have learned from the ideal roofing Houston based companies:
For leaking
To deal with or prevent leaking, ensuring the quality of roofing metal is necessary. In addition to this, fitting down with precision will help keep any damage due to leaking out of the way.
For roof scratching
The easiest way to manage roof scratching is to apply a paint coating that matches the roof colour. But this is applicable in case of minimal damage. If huge portions of the roof have been scratched, a replacement will become inevitable.
For oil canning
For oil canning, choosing metal sheets that are thick and made of low glossy material can be helpful. This reduces the chances as well as visibility if oil canning does occur. While cutting the sheets, a ribbed roller must be used to slit along the flat regions only.
For corrosion
The problem of corrosion in different forms requires an appropriate choice of metal for the roof, along with a protective coating. The use of different kinds of metals must also be avoided— this will significantly reduce corrosion.
For colour fading and chalking
To avoid color fading and chalking, adhesives of high quality must be used. Most manufacturers also provide warranties that restore the roofing up to a certain level of damage by colour fading and chalking.
Conclusion
Most of these problems, along with all errors of installation, can be solved with the ideal roofing Houston based companies. The best roofing solutions in Houston can be availed from
Texas Certified Roofing – a company that excels in the service charts. With the most effective, affordable and premier quality roofing services – our company is what you need for a top-class installation experience.
If you are searching for roof installation services in Houston TX, contact Texas Certified Roofing right now!







